Green manufacturing: uma análise da produção científica e de tendências para o futuro
Green manufacturing: an analysis of scientific publications and trends for the future
Silva, Diogo Aparecido Lopes; Silva, Eraldo Jannone da; Ometto, Aldo Roberto
http://dx.doi.org/10.1590/0103-6513.032513
Production, vol.26, n3, p.642-655, 2016
Resumo
O objetivo deste artigo foi realizar uma análise da produção científica internacional na área de green manufacturing. Foi utilizada a base de dados Web of Science, tendo sido mapeados 239 artigos no período de 1991 a 2013. As publicações envolveram 589 autores, de 36 países, 246 instituições e 142 diferentes periódicos/conferências. Destaca-se que 51,4% dos artigos foram publicados nos últimos cinco anos. Entre os países mais prolíficos destacaram-se os Estados Unidos e a China. O periódico mais prolífico foi o Journal of Cleaner Production, com 19 artigos no período. Sobre a análise de autoria, destacou-se a categoria one-timers, com 85,7% das publicações. A maior produção foi de 11 artigos por autor e o mais citado recebeu 368 citações. Conclui-se que a temática teve uma ascensão expressiva nos últimos anos, com foco em estudos teóricos e teórico-empíricos.
Palavras-chave
Manufatura sustentável. Manufatura ambientalmente sustentável. Bibliometria. Revisão de literatura.
Abstract
This paper presents an analysis of the international scientific publications in the green manufacturing area. We used the Web of Science database to identify 239 articles published between 1991 and 2013. The articles involved 589 authors from 36 countries, 246 institutions, and 142 journals/conferences. We found that 51.4% of the articles were published within the last five years. Among the countries involved, the most prolific were the United States and China. The most prolific journal was the Journal of Cleaner Production with 19 articles. Most of the authors, 85.7%, were one-time authors in the field. The highest yield was 11 articles by one author, and the most cited author received 368 citations. We concluded that the green manufacturing area has increased its relevance in recent years by focusing on theoretical and empirical-theoretical studies.
Keywords
Sustainable manufacturing. Environmentally conscious manufacturing. Bibliometrics. Literature review.
References
Allen, D., Bauer, D., Bras, B., Gutowski, T., Murphy, C., Piwonka, T., Sheng, P., Sutherland, J., Thurston, D., & Wolff, E. (2002). Environmentally benign manufacturing: trends in Europe, Japan, and the USA. Journal of Manufacturing Science and Engineering, 124, 908-920. http://dx.doi.org/10.1115/1.1505855
Amrina, E., & Yusof, S. M. (2011). Key performance indicators for sustainable manufacturing evaluation in automotive companies. In Proceedings the IEEE International Conference on Industrial Engineering and Engineering Management, Singapore. doi:10.1109/IEEM.2011.6118084
Araújo, J. B., & Oliveira, J. F. G. (2012). Towards a balanced scoreboard for assessing manufacturing processes sustainability. International Journal of Business Performance Management, 13, 198-221.
Associação Brasileira de Normas Técnicas - ABNT. (2009). NBR ISO 14044: Gestão ambiental – avaliação do ciclo de vida – Requisitos e orientações. Rio de Janeiro.
Behrendt, T., Zein, A., & Min, S. (2012). Development of an energy consumption monitoring procedure for machine tools. CIRP Annals - Manufacturing Technology, 61, 43-46. http://dx.doi.org/10.1016/j.cirp.2012.03.103
Bergmiller, G. G. (2006). Lean manufacturers transcendence to green manufacturing: correlating the diffusion of lean and green manufacturing systems. Florida: University of South Florida.
Choi, A. C. K., Kaebernick, H., & Lai, W. H. (1997). Manufacturing processes modeling for environmental impact assessment. Journal of Materials Processing Technology, 70, 231-238. http://dx.doi.org/10.1016/S0924-0136(97)00067-8
Despeisse, M., Ball, P. D., Evans, S., & Levers, A. (2012a). Industrial ecology at factory level: a prototype methodology. Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture, 226, 1648-1664. http://dx.doi.org/10.1177/0954405412449937
Despeisse, M., Ball, P. D., Evans, S., & Levers, A. (2012b). Industrial ecology at factory level: a conceptual model. Journal of Cleaner Production, 31, 30-39. http://dx.doi.org/10.1016/j.jclepro.2012.02.027
Despeisse, M., Mbaye, F., Ball, P. D., & Levers, A. (2012c). The emergence of sustainable manufacturing practices. Production Planning & Control: The Management of Operations, 23, 354-376. http://dx.doi.org/10.1080/09537287.2011.555425
Dornfeld, A. D. (2012). Green manufacturing: fundamentals and applications. Berkeley: Springer.
Duflou, J. R., Sutherland, J. W., Dornfeld, D., Hermann, C., Jeswiet, J., Kara, S., Hauschild, M., & Kellens, K. (2012). Towards energy and resource efficient manufacturing: a processes and systems approach. CIRP Annals - Manufacturing Technology, 61, 587-609. http://dx.doi.org/10.1016/j.cirp.2012.05.002
Energy Information Administration - EIA. Annual Energy Review 2011. Retrieved from http://www.eia.gov/totalenergy/data/annual/pdf/aer.pdf
Florida, R. (1996). Lean and green: the move to environmentally conscious manufacturing. California Management Review, 39, 80-105. http://dx.doi.org/10.2307/41165877
Garetti, M., & Taisch, M. (2012). Sustainable manufacturing: trends and research challenges. Production Planning & Control: The Management of Operations, 23, 83-104. http://dx.doi.org/10.1080/09537287.2011.591619
Gungor, A., & Gupta, S. M. (1999). Issues in environmentally conscious manufacturing and product recovery: a survey. Computers & Industrial Engineering, 36, 811-853. http://dx.doi.org/10.1016/S0360-8352(99)00167-9
Gutowski, T., Murphy, C., Allen, D., Bauer, D., Bras, B., Piwonka, T., Sheng, P., Sutherland, J., Thurston, D., & Wolff, E. (2005). Environmentally benign manufacturing: observations from Japan, Europe and the United States. Journal of Cleaner Production, 13, 1-17. http://dx.doi.org/10.1016/j.jclepro.2003.10.004
He, Y., & Liu, F. (2010). Methods for integrating energy consumption and environmental impact considerations into the production operation of machining processes. Chinese Journal of Mechanical Engineering, 23, 1-8. http://dx.doi.org/10.3901/CJME.2010.04.428
Ilgin, M. A., & Gupta, S. M. (2010). Environmentally conscious manufacturing and product recovery (ECMPRO): a review of the state of the art. Journal of Environmental Management, 91, 563-591. PMid:19853369. http://dx.doi.org/10.1016/j.jenvman.2009.09.037
International Trade Administration - ITA. (2010). How does Commerce define Sustainable Manufacturing? Retrieved from http://www.trade.gov/competitiveness/sustainablemanufacturing/how_doc_defines_SM.asp
Jelinski, L. W., Graedel, T. E., Laudise, R. A., McCall, D. W., & Patel C. K. N. (1992). Industrial Ecology: concepts and approaches. Proceedings of the National Academy of Sciences of the United States of America, 89, 793-797. http://dx.doi.org/10.1073/pnas.89.3.793
Jovane, F., Yoshikawa, H., Alting, L., Boër, CR., Westkamper, E., Williams, D., Tseng, M., Seliger, G., & Paci, AM. (2008). The incoming global technological and industrial revolution towards competitive sustainable manufacturing. CIRP Annals - Manufacturing Technology, 57, 641-659. http://dx.doi.org/10.1016/j.cirp.2008.09.010
Kalpakjian, S. (2001). Manufacturing engineering and technology. Upper Saddle Rive: Prentice Hall.
King, A. A., & Lenox, M. J. (2001). Lean and green? An empirical examination of the relationship between lean production and environmental performance. Production and Operations Management, 10, 244-256. http://dx.doi.org/10.1111/j.1937-5956.2001.tb00373.x
Li, C., Liu, F., Tan, X. C., & Du, Y. (2010). A methodology for selecting a green technology portfolio based on synergy. International Journal of Production Research, 48, 7289-7302. http://dx.doi.org/10.1080/00207540903382857
Linke, B., Huang, Y. C., & Dornfeld, D. (2012). Establishing greener products and manufacturing processes. International Journal of Precision Engineering and Manufacturing 13, 1029-1036. http://dx.doi.org/10.1007/s12541-012-0134-z
Manufuture. (2004). A vision for 2020: assuring the future of manufacturing in Europe. European Comission. (Report of the high-level group). Merchant, M. E., Dornfeld, D., & Wright, P. K. (2005).
Manufacturing: its evolution and future. Berkeley. Retrieved from http://escholarship.org/uc/item/36d27692 Millar, H. H., & Russell, S. N. (2011). The adoption of sustainable manufacturing practices in the Caribbean. Business Strategy and the Environment, 20, 512-526. http://dx.doi.org/10.1002/bse.707
Murray, V. R., Zhao, F., & Sutherland, J. W. (2012). Life cycle analysis of grinding: a case study of non-cylindrical computer numerical control grinding via unit-process life cycle inventory approach. Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering of Manufacturing, 226, 1604-1611.
National Institute of Standards and Technology – NIST. Overview of the sustainable manufacturing. Retrieved from http://www.mel.nist.gov/msid/SSP/introduction/manufacturing.html#2.
Pusavec, F., Krajnik, P., & Kopac, J. (2010). Transitioning to sustainable production. Part I: application on machining technologies. Journal of Cleaner Production, 18, 174-184. http://dx.doi.org/10.1016/j.jclepro.2009.08.010
Rusinko, C. A. (2007). Green manufacturing: an evaluation of environmentally sustainable manufacturing practices and their impact on competitive outcomes. IEEE Transactions on Engineering Management, 54, 445-454. http://dx.doi.org/10.1109/TEM.2007.900806
Sarkis, J. (1995). Manufacturing strategy and environmental consciousness. Technovation, 15, 79-97. http://dx.doi.org/10.1016/0166-4972(95)96612-W
Sarkis, J. A. (1999). Methodological framework for evaluating environmentally conscious manufacturing programs. Computers & Industrial Engineering, 36, 793-810. http://dx.doi.org/10.1016/S0360-8352(99)00166-7
Shang, Z., Qin, S., Liu, Q., & Liu, F. (2012). Key manufacturing technology & equipment for energy saving and emissions reduction in mechanical equipment industry. International Journal of Precision Engineering and Manufacturing 13, 1095-1100. http://dx.doi.org/10.1007/s12541-012-0143-y
Silva, D. A. L., Delai, I., Castro, M. A. S., & Ometto, A. R. (2013). Quality tools applied to Cleaner Production programs: a first approach toward a new methodology. Journal of Cleaner Production, 47, 174-187. http://dx.doi.org/10.1016/j.jclepro.2012.10.026
Silva, P. R. S., & Amaral, F. G. (2009). An integrated methodology for environmental impacts and costs evaluation in industrial processes. Journal of Cleaner Production, 17, 1339-1350. http://dx.doi.org/10.1016/j.jclepro.2009.04.010
Silva, E. J., Ometto, A. R., Rozenfeld, H., Silva, D. A. L., Pigosso, D. C. A., & Reis, V. R. A. (2012). Prototypal implementation of a remanufacturing oriented grinding machine. In D. Dornfeld & B. S. Linke (Eds.), Proceedings of the 19th CIRP International Conference on Life Cycle Engineering (pp. 257-262). Berkeley: Springer-Verlag.
Singh, P., & Sangwan, K. S. (2010). Product and process characteristics for green manufacturing: evidence from Indian SMEs. In Proceedings of the ASME 2010 International Manufacturing Science and Engineering Conference, New York. http://dx.doi.org/10.1115/MSEC2010-34077
Sustainable Manufacturing Initiative. (2011). What does sustainable manufacturing mean to Australia? The CSIRO Future Manufacturing Flagship.
United Nations Environment Programme – UNEP. (2011). Towards a Green economy: pathways to sustainable development and poverty eradication. Retrieved from http://www.unep.org/greeneconomy
Vinodh, S., Jayakrshna, K., & Joy, D. (2012). Environmental impact assessment of an automotive component using eco-indicator and CML methodologies. Clean Technologies and Environmental Policy, 14, 333-344. http://dx.doi.org/10.1007/s10098-011-0405-x
Vinodh, S., & Joy, D. (2012). Structural equation modeling of sustainable manufacturing practices. Clean Technologies and Environmental Policy, 14, 79-84. http://dx.doi.org/10.1007/s10098-011-0379-8
Vinodh, S., & Rathod, G. (2010). Integration of ECQFD and LCA for sustainable product design. Journal of Cleaner Production, 18, 833-842. http://dx.doi.org/10.1016/j.jclepro.2009.12.024
Walter, S. A., & Bach, T. M. (2013). Inserção de pesquisadores entrantes na área de estratégia: análise das relações de autoria e temas estudados no período de 1997-2010. Revista Eletrônica de Administração, 19, 165-191. http://dx.doi.org/10.1590/S1413-23112013000100007
World Commission on Environment and Development - WCED. (1987). Our common future. Oxford: Oxford University Press.
Amrina, E., & Yusof, S. M. (2011). Key performance indicators for sustainable manufacturing evaluation in automotive companies. In Proceedings the IEEE International Conference on Industrial Engineering and Engineering Management, Singapore. doi:10.1109/IEEM.2011.6118084
Araújo, J. B., & Oliveira, J. F. G. (2012). Towards a balanced scoreboard for assessing manufacturing processes sustainability. International Journal of Business Performance Management, 13, 198-221.
Associação Brasileira de Normas Técnicas - ABNT. (2009). NBR ISO 14044: Gestão ambiental – avaliação do ciclo de vida – Requisitos e orientações. Rio de Janeiro.
Behrendt, T., Zein, A., & Min, S. (2012). Development of an energy consumption monitoring procedure for machine tools. CIRP Annals - Manufacturing Technology, 61, 43-46. http://dx.doi.org/10.1016/j.cirp.2012.03.103
Bergmiller, G. G. (2006). Lean manufacturers transcendence to green manufacturing: correlating the diffusion of lean and green manufacturing systems. Florida: University of South Florida.
Choi, A. C. K., Kaebernick, H., & Lai, W. H. (1997). Manufacturing processes modeling for environmental impact assessment. Journal of Materials Processing Technology, 70, 231-238. http://dx.doi.org/10.1016/S0924-0136(97)00067-8
Despeisse, M., Ball, P. D., Evans, S., & Levers, A. (2012a). Industrial ecology at factory level: a prototype methodology. Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture, 226, 1648-1664. http://dx.doi.org/10.1177/0954405412449937
Despeisse, M., Ball, P. D., Evans, S., & Levers, A. (2012b). Industrial ecology at factory level: a conceptual model. Journal of Cleaner Production, 31, 30-39. http://dx.doi.org/10.1016/j.jclepro.2012.02.027
Despeisse, M., Mbaye, F., Ball, P. D., & Levers, A. (2012c). The emergence of sustainable manufacturing practices. Production Planning & Control: The Management of Operations, 23, 354-376. http://dx.doi.org/10.1080/09537287.2011.555425
Dornfeld, A. D. (2012). Green manufacturing: fundamentals and applications. Berkeley: Springer.
Duflou, J. R., Sutherland, J. W., Dornfeld, D., Hermann, C., Jeswiet, J., Kara, S., Hauschild, M., & Kellens, K. (2012). Towards energy and resource efficient manufacturing: a processes and systems approach. CIRP Annals - Manufacturing Technology, 61, 587-609. http://dx.doi.org/10.1016/j.cirp.2012.05.002
Energy Information Administration - EIA. Annual Energy Review 2011. Retrieved from http://www.eia.gov/totalenergy/data/annual/pdf/aer.pdf
Florida, R. (1996). Lean and green: the move to environmentally conscious manufacturing. California Management Review, 39, 80-105. http://dx.doi.org/10.2307/41165877
Garetti, M., & Taisch, M. (2012). Sustainable manufacturing: trends and research challenges. Production Planning & Control: The Management of Operations, 23, 83-104. http://dx.doi.org/10.1080/09537287.2011.591619
Gungor, A., & Gupta, S. M. (1999). Issues in environmentally conscious manufacturing and product recovery: a survey. Computers & Industrial Engineering, 36, 811-853. http://dx.doi.org/10.1016/S0360-8352(99)00167-9
Gutowski, T., Murphy, C., Allen, D., Bauer, D., Bras, B., Piwonka, T., Sheng, P., Sutherland, J., Thurston, D., & Wolff, E. (2005). Environmentally benign manufacturing: observations from Japan, Europe and the United States. Journal of Cleaner Production, 13, 1-17. http://dx.doi.org/10.1016/j.jclepro.2003.10.004
He, Y., & Liu, F. (2010). Methods for integrating energy consumption and environmental impact considerations into the production operation of machining processes. Chinese Journal of Mechanical Engineering, 23, 1-8. http://dx.doi.org/10.3901/CJME.2010.04.428
Ilgin, M. A., & Gupta, S. M. (2010). Environmentally conscious manufacturing and product recovery (ECMPRO): a review of the state of the art. Journal of Environmental Management, 91, 563-591. PMid:19853369. http://dx.doi.org/10.1016/j.jenvman.2009.09.037
International Trade Administration - ITA. (2010). How does Commerce define Sustainable Manufacturing? Retrieved from http://www.trade.gov/competitiveness/sustainablemanufacturing/how_doc_defines_SM.asp
Jelinski, L. W., Graedel, T. E., Laudise, R. A., McCall, D. W., & Patel C. K. N. (1992). Industrial Ecology: concepts and approaches. Proceedings of the National Academy of Sciences of the United States of America, 89, 793-797. http://dx.doi.org/10.1073/pnas.89.3.793
Jovane, F., Yoshikawa, H., Alting, L., Boër, CR., Westkamper, E., Williams, D., Tseng, M., Seliger, G., & Paci, AM. (2008). The incoming global technological and industrial revolution towards competitive sustainable manufacturing. CIRP Annals - Manufacturing Technology, 57, 641-659. http://dx.doi.org/10.1016/j.cirp.2008.09.010
Kalpakjian, S. (2001). Manufacturing engineering and technology. Upper Saddle Rive: Prentice Hall.
King, A. A., & Lenox, M. J. (2001). Lean and green? An empirical examination of the relationship between lean production and environmental performance. Production and Operations Management, 10, 244-256. http://dx.doi.org/10.1111/j.1937-5956.2001.tb00373.x
Li, C., Liu, F., Tan, X. C., & Du, Y. (2010). A methodology for selecting a green technology portfolio based on synergy. International Journal of Production Research, 48, 7289-7302. http://dx.doi.org/10.1080/00207540903382857
Linke, B., Huang, Y. C., & Dornfeld, D. (2012). Establishing greener products and manufacturing processes. International Journal of Precision Engineering and Manufacturing 13, 1029-1036. http://dx.doi.org/10.1007/s12541-012-0134-z
Manufuture. (2004). A vision for 2020: assuring the future of manufacturing in Europe. European Comission. (Report of the high-level group). Merchant, M. E., Dornfeld, D., & Wright, P. K. (2005).
Manufacturing: its evolution and future. Berkeley. Retrieved from http://escholarship.org/uc/item/36d27692 Millar, H. H., & Russell, S. N. (2011). The adoption of sustainable manufacturing practices in the Caribbean. Business Strategy and the Environment, 20, 512-526. http://dx.doi.org/10.1002/bse.707
Murray, V. R., Zhao, F., & Sutherland, J. W. (2012). Life cycle analysis of grinding: a case study of non-cylindrical computer numerical control grinding via unit-process life cycle inventory approach. Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering of Manufacturing, 226, 1604-1611.
National Institute of Standards and Technology – NIST. Overview of the sustainable manufacturing. Retrieved from http://www.mel.nist.gov/msid/SSP/introduction/manufacturing.html#2.
Pusavec, F., Krajnik, P., & Kopac, J. (2010). Transitioning to sustainable production. Part I: application on machining technologies. Journal of Cleaner Production, 18, 174-184. http://dx.doi.org/10.1016/j.jclepro.2009.08.010
Rusinko, C. A. (2007). Green manufacturing: an evaluation of environmentally sustainable manufacturing practices and their impact on competitive outcomes. IEEE Transactions on Engineering Management, 54, 445-454. http://dx.doi.org/10.1109/TEM.2007.900806
Sarkis, J. (1995). Manufacturing strategy and environmental consciousness. Technovation, 15, 79-97. http://dx.doi.org/10.1016/0166-4972(95)96612-W
Sarkis, J. A. (1999). Methodological framework for evaluating environmentally conscious manufacturing programs. Computers & Industrial Engineering, 36, 793-810. http://dx.doi.org/10.1016/S0360-8352(99)00166-7
Shang, Z., Qin, S., Liu, Q., & Liu, F. (2012). Key manufacturing technology & equipment for energy saving and emissions reduction in mechanical equipment industry. International Journal of Precision Engineering and Manufacturing 13, 1095-1100. http://dx.doi.org/10.1007/s12541-012-0143-y
Silva, D. A. L., Delai, I., Castro, M. A. S., & Ometto, A. R. (2013). Quality tools applied to Cleaner Production programs: a first approach toward a new methodology. Journal of Cleaner Production, 47, 174-187. http://dx.doi.org/10.1016/j.jclepro.2012.10.026
Silva, P. R. S., & Amaral, F. G. (2009). An integrated methodology for environmental impacts and costs evaluation in industrial processes. Journal of Cleaner Production, 17, 1339-1350. http://dx.doi.org/10.1016/j.jclepro.2009.04.010
Silva, E. J., Ometto, A. R., Rozenfeld, H., Silva, D. A. L., Pigosso, D. C. A., & Reis, V. R. A. (2012). Prototypal implementation of a remanufacturing oriented grinding machine. In D. Dornfeld & B. S. Linke (Eds.), Proceedings of the 19th CIRP International Conference on Life Cycle Engineering (pp. 257-262). Berkeley: Springer-Verlag.
Singh, P., & Sangwan, K. S. (2010). Product and process characteristics for green manufacturing: evidence from Indian SMEs. In Proceedings of the ASME 2010 International Manufacturing Science and Engineering Conference, New York. http://dx.doi.org/10.1115/MSEC2010-34077
Sustainable Manufacturing Initiative. (2011). What does sustainable manufacturing mean to Australia? The CSIRO Future Manufacturing Flagship.
United Nations Environment Programme – UNEP. (2011). Towards a Green economy: pathways to sustainable development and poverty eradication. Retrieved from http://www.unep.org/greeneconomy
Vinodh, S., Jayakrshna, K., & Joy, D. (2012). Environmental impact assessment of an automotive component using eco-indicator and CML methodologies. Clean Technologies and Environmental Policy, 14, 333-344. http://dx.doi.org/10.1007/s10098-011-0405-x
Vinodh, S., & Joy, D. (2012). Structural equation modeling of sustainable manufacturing practices. Clean Technologies and Environmental Policy, 14, 79-84. http://dx.doi.org/10.1007/s10098-011-0379-8
Vinodh, S., & Rathod, G. (2010). Integration of ECQFD and LCA for sustainable product design. Journal of Cleaner Production, 18, 833-842. http://dx.doi.org/10.1016/j.jclepro.2009.12.024
Walter, S. A., & Bach, T. M. (2013). Inserção de pesquisadores entrantes na área de estratégia: análise das relações de autoria e temas estudados no período de 1997-2010. Revista Eletrônica de Administração, 19, 165-191. http://dx.doi.org/10.1590/S1413-23112013000100007
World Commission on Environment and Development - WCED. (1987). Our common future. Oxford: Oxford University Press.
Facebook
Google+
Twitter
LinkedIn
Mendeley
StumbleUpon
CiteULike
Reddit
Email